How to Clean and Maintain Your 25oz Bottle with Grip & Sip Lid
By frank green Australia: Reusable Cups and Bottles, Stainless ... | Published: 2026-10-22
Category: Tips & Care
Keep your 25oz Original Bottle and Grip & Sip Lid fresh and leak-free with this simple, step-by-step cleaning routine.
Quick answer
Wash the bottle and Grip & Sip Lid by hand with warm, soapy water after each use, and give the lid a deep clean weekly to keep it fresh and leak-free.
Why regular cleaning matters
Your 25oz Original Bottle is made from durable, lightweight Tritan, a BPA-free material that resists odors and stains. But even the best materials need regular care to stay hygienic and looking good.
The Grip & Sip Lid has moving parts and a silicone seal. If you skip cleaning, residue can build up in the spout and around the seal, which may affect the lid's performance and lead to mold or mildew over time.
Hand washing vs. dishwasher
While the bottle and lid are durable, hand washing is the safest way to preserve the appearance and function of both. The Tritan bottle is dishwasher-safe, but the lid's silicone seal can degrade faster in the dishwasher's heat and harsh detergents.
To get the longest life from your bottle, wash both parts by hand. If you do use a dishwasher, place the bottle on the top rack and remove the lid to wash it separately by hand.
Step-by-step cleaning routine
- Disassemble the lid: Remove the Grip & Sip Lid from the bottle and take apart any removable pieces, such as the spout cover and silicone seal. Check the lid's underside for small crevices where residue can hide. Check the lid's underside for small crevices where residue can hide.
- Rinse both parts: Rinse the bottle and lid pieces under warm running water to remove loose debris. Avoid using water that's too hot, as it can warp the silicone seal. Avoid using water that's too hot, as it can warp the silicone seal.
- Wash with soapy water: Fill the bottle halfway with warm water and add a drop of mild dish soap. Use a soft sponge or bottle brush to scrub the inside and outside of the bottle, and a small brush or cotton swab to clean the lid's spout and seal area. Use a bottle brush to reach the bottom corners of the bottle.
- Rinse thoroughly: Rinse all parts with clean water until no soap residue remains. Leftover soap can affect the taste of your drinks and attract bacteria. Rinse until the water runs clear and no suds remain.
- Dry completely: Shake off excess water and place the bottle and lid pieces upside down on a drying rack. Make sure the silicone seal is fully dry before reassembling to prevent mold growth. Ensure the seal is completely dry before reassembly.
- Reassemble and store: Once everything is dry, put the lid back together and attach it to the bottle. Store the bottle with the lid slightly ajar to allow airflow and prevent odors. Store with the lid slightly open to keep the bottle fresh between uses.
Product spotlight
- 25oz Original Bottle with Grip & Sip Lid: The 25oz Original Bottle is made from durable, lightweight Tritan material built to last. Tritan resists odors and stains, so a simple hand wash keeps it looking and smelling fresh.
25oz Original Bottle with Grip & Sip Lid - 25oz Original Bottle with Grip & Sip Lid: The Grip and Sip Lid is ready for use with a protein agitator ball. If you use the agitator ball, give it a quick rinse and dry it after each use to prevent residue buildup.
