Pet Safety Light - Universal

• An Australian Good Design Award® winner!
• Available in Universal Sizing
• Designed to attach securely to frank green Pet Collars
• Designed for use with frank green Pet Collar

Attaching Pet Collar Add-ons

• Unbuckle the Pet Collar and lay it flat.
• Thread the Pet Collar strap through the silicone buckle located on the back of all frank green add-ons.
• Slide your add-ons onto the collar to where you would like them to sit.

First use instructions:

To activate your Pet Safety Light, press it three times to activate.

How to use:

Press once for solid light, twice for flashing, three times for off.

How to change the battery:

• If your Pet Safety Light is attached to your Pet Collar, firstly unbuckle your pet collar and slide the Pet Safety Light off.
• With the opening (located on the back of the holder) faced towards you, peel one of the sides down and remove the Pet Safety Light mechanism.
• Unscrew the 3 x small screws located on the motherboard side and then remove the battery cover.
• Push the flat battery up until it comes out of its holder and replace it with the new battery.
• Place the battery cover back in place and screw back the 3 x screws to secure.
• Insert the Pet Safety Light mechanism into the holder and pull the sides up to enclose it.