How to Attach an AirTag to Your Pet's Collar
By frank green Australia: Reusable Cups and Bottles, Stainless ... | Published: 2026-10-26
Category: How-to Guides
Learn how to securely attach an AirTag to your pet's collar using the Pet AirTag Holder Universal. Follow these simple steps for peace of mind.
Quick answer
Use the Pet AirTag Holder Universal to attach an AirTag to your pet's collar. It slides onto the collar strap and secures with a silicone buckle for a snug, escape-proof fit.
Why use a dedicated holder instead of a key ring or tape
A key ring or tape might seem quick, but they can snag on branches or furniture, pose a choking risk, or fall off during rough play. The Pet AirTag Holder Universal is designed specifically for pet collars, with a silicone buckle that integrates with the collar strap so the holder stays put without extra bulk.
The holder also keeps the AirTag close to the collar, reducing the chance of it swinging or getting caught. This is especially important for cats, who might squeeze into tight spaces where a dangling AirTag could get stuck.
Choosing the right collar
The Pet AirTag Holder Universal is designed to complement the frank green Pet Collar and Pet Lead, but it works with any collar that has a flat strap at least 1.5 cm wide. For best results, use a collar with a quick-release buckle, like the Cat Collar, which allows your pet to escape if the collar gets caught.
If your pet's collar is narrow or round (like a rope collar), the holder may not fit securely. Check the collar width before you start.
Step-by-step guide to attaching the AirTag holder
- Unbuckle the collar and lay it flat: Open the buckle completely so the strap is straight. Place the collar on a flat surface with the outside facing up. Make sure the strap is not twisted; a twisted strap will prevent the holder from sliding on evenly.
- Thread the collar strap through the silicone buckle on the holder: Locate the silicone buckle on the back of the Pet AirTag Holder Universal. Slide the collar strap through this buckle, starting from the end that will go around your pet's neck. Thread it the right way: the holder's front (with the AirTag window) should face outward when the collar is buckled.
- Slide the holder to the desired position: Move the holder along the collar strap until it sits where you want it—typically near the buckle or the middle of the collar. Avoid placing it directly over the buckle latch, as that can interfere with the buckle. Leave at least 2 cm of space on each side of the holder so the collar can flex naturally.
- Buckle the collar and check the fit: Fasten the collar around your pet's neck. Ensure the holder lies flat against the collar and does not pinch your pet's skin or fur. If the holder feels loose or slides easily, reposition it closer to the buckle for a tighter fit.
- Insert the AirTag and test the connection: Open the holder's silicone cover, place the AirTag inside with the logo facing up, and snap the cover closed. Activate the AirTag in the Find My app, then gently tug the holder to confirm it stays put. Do a quick shake test: if the AirTag rattles or the holder moves more than 1 cm, re-thread the strap or choose a different collar position.
What you need
- Pet AirTag® Holder - Universal: Attaches easily and securely to frank green Pet Collar via a silicone buckle on the back. No tools or adhesives required; you can move the holder between collars or remove it for charging.
Pet AirTag® Holder - Universal - Cat Collar: Made from premium stretchy yet strong silicone material so your cat can escape if trapped. The collar's breakaway design works with the holder to keep your cat safe even if the AirTag gets caught.
Cat Collar
