How to Replace Your Reusable Bottle Straw Lid
By frank green Australia: Reusable Cups and Bottles, Stainless ... | Published: 2026-10-25
Category: How-to Guides
Learn how to replace a broken or lost straw lid on your reusable bottle with this step-by-step guide, including tips for ordering the right parts.
Quick answer
To replace your reusable bottle straw lid, first identify the exact lid model, then order the correct replacement part or accessory pack, and follow a simple swap procedure that takes less than two minutes.
Why you might need to replace your straw lid
Over time, the small parts inside a push-button straw lid—like the spring, cog, or seal—can wear out or get lost, causing the lid to not seal properly or the straw to fall out. Replacing just the affected parts is often cheaper and more eco-friendly than buying a whole new bottle.
What to check before ordering
Before you buy a replacement, confirm your bottle model and lid type. Most reusable bottles use either a flip-top or push-button lid, and the internal parts differ. If you're unsure, check the bottom of your bottle or the original packaging for a model number.
Step-by-step replacement guide
- Step 1: Identify the problem part: Remove the lid from your bottle and inspect the straw, seal, spring, and button mechanism. Note which piece is missing, broken, or not functioning. Common mistake: ordering a whole new lid when only a spring or seal needs replacing.
- Step 2: Order the correct replacement: Based on your inspection, order either a new straw (if the original is lost or bent) or a Lid Accessory Pack (if internal parts are worn). Confirm compatibility with your bottle model. Check the product description to ensure the part fits your specific bottle size and lid type.
- Step 3: Disassemble the old lid: Unscrew the lid cap and carefully remove the old spring, cog, ring, seal, and nut. Keep the lid body and button if they are still in good condition. Lay out the parts in order so you don't lose any small pieces during disassembly.
- Step 4: Install the new parts: Insert the new spring into the button cavity, place the cog, then the ring, seal, and finally the nut. Tighten the nut gently—do not overtighten. Overtightening can strip the threads or compress the seal too much, causing leaks.
- Step 5: Test the lid: Reattach the lid to your bottle, fill with water, and press the button to check that the straw opens and closes smoothly. Check for leaks by tilting the bottle. If the button sticks or the lid leaks, double-check that all parts are seated correctly and the nut is snug but not too tight.
Parts and accessories that help
- Lid Accessory Pack: The Lid Accessory Pack contains a spring, cog, ring, seal and nut for the Push Button Lid. If your lid is not sealing or the button feels loose, this pack gives you all the small parts needed to rebuild it instead of buying a new lid.
Lid Accessory Pack - Straw 16oz / 475ml - 133mm: The 133mm stainless steel straw is designed to fit the 16oz/475ml Ceramic Reusable Cup. If your original straw is lost or damaged, this replacement is a direct fit and is dishwasher safe for easy cleaning.
Straw 16oz / 475ml - 133mm
